[lcd4linux @ 2000-03-28 08:48:33 by reinelt]

README.X11 added

git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@26 3ae390bd-cb1e-0410-b409-cd5a39f66f1f

diff --git a/README.X11 b/README.X11
new file mode 100644 (file)
index 0000000..0df71a7
--- /dev/null
+++ b/README.X11
@@ -0,0 +1,45 @@
+#
+# $Id: README.X11,v 1.1 2000/03/28 08:48:33 reinelt Exp $
+#
+
+This is the README file for the X11 display driver for lcd4linux
+
+The driver opens a X11 window based on the geometry specified in the
+config file. This window cannot be resized. The contents of the window
+will be redrawn every 'tick' msec.
+
+The driver uses very low cpu time, and requires low bandwitdh, because 
+only modified pixels are redrawn.
+
+
+Configuration:
+
+The driver needs/supports the following entries in lcd4linux.conf:
+
+Display: must be "X11"
+size: [columns]x[rows], e.g. "20x4"
+font: [xrex]x[yres], at the moment only "5x8" and "6x8" supported.
+pixel: [pixelsize]+[pixelgap], e.g. "5+1"
+gap: [row gap]x[column gap], e.g. "3x3"
+border: border width
+foreground: color of an active LCD Pixel, must be #rrggbb
+halfground: color of an inactive LCD Pixel, must be #rrggbb
+background: backlight color, must be #rrggbb
+
+This may look weird, but it is weird. Let's explain this a bit further:
+The X11 driver tries to emulate a real LC display. A real LCD has a
+size of columns*rows characters. Each character consists of xres*yres 
+LCD cells. One single cell will be represented by a rectangle of
+pixelsize*pixelsize pixels. If you want to, you can emulate the gap 
+between this lcd cells by specifying a pixelgap greater than zero.
+Sometimes there's a gap between characters, too. You can specify this 
+gap (in pixels again) horizontally and vertically. Usually this gap
+is the same size as a cell (which is pixelsize+pixelgap). 
+
+If you use a font of 5x8, some characters may use the first and the last 
+pixel. So you should specify a column gap, otherwise the caracters may 
+touch. On the other hand, the 6x8 font never uses the first pixel. So you 
+can omit the column gap, and will get the same text layout, but 
+uninterupted bars!
+
+After all: don't try to understand this unless you have tried it out!

diff --git a/XWindow.c b/XWindow.c
index ab86857c925f6ba37464b78a716a17ab6978216a..1b6b5d6cf3ddb2695a398bb45553a0d0e478d134 100644 (file)
--- a/XWindow.c
+++ b/XWindow.c
@@ -1,4 +1,4 @@
-/* $Id: XWindow.c,v 1.7 2000/03/28 07:22:15 reinelt Exp $
+/* $Id: XWindow.c,v 1.8 2000/03/28 08:48:33 reinelt Exp $
  *
  * X11 Driver for LCD4Linux 
  *
@@ -20,6 +20,10 @@
  *
  *
  * $Log: XWindow.c,v $
+ * Revision 1.8  2000/03/28 08:48:33  reinelt
+ *
+ * README.X11 added
+ *
  * Revision 1.7  2000/03/28 07:22:15  reinelt
  *
  * version 0.95 released
@@ -118,7 +122,7 @@ void shmcleanup() {
 }
 
 void quit(int nsig) {
-       printf("pid%d got signal %d\n",getpid(),nsig);
+       printf("X11: pid %d got signal %d\n",getpid(),nsig);
        semcleanup();
        shmcleanup();
        exit(0);
@@ -187,7 +191,7 @@ XColor co_dummy;
 XEvent ev;
 
        if ((dp=XOpenDisplay(NULL))==NULL) {
-               fprintf(stderr,"can't open display\n");
+               fprintf(stderr,"X11: can't open display\n");
                return -1;
        }
        sc=DefaultScreen(dp);
@@ -198,22 +202,22 @@ XEvent ev;
        cm=DefaultColormap(dp,sc);
 
        if (XAllocNamedColor(dp,cm,rgbfg,&co[0],&co_dummy)==False) {
-               fprintf(stderr,"can't alloc foreground color '%s'\n",
+               fprintf(stderr,"X11: can't alloc foreground color '%s'\n",
                        rgbfg);
                return -1;
        }
        if (XAllocNamedColor(dp,cm,rgbbg,&co[1],&co_dummy)==False) {
-               fprintf(stderr,"can't alloc background color '%s'\n",
+               fprintf(stderr,"X11: can't alloc background color '%s'\n",
                        rgbbg);
                return -1;
        }
        if (XAllocNamedColor(dp,cm,rgbhg,&co[2],&co_dummy)==False) {
-               fprintf(stderr,"can't alloc halfground color '%s'\n",
+               fprintf(stderr,"X11: can't alloc halfground color '%s'\n",
                        rgbhg);
                return -1;
        }
        if (XAllocNamedColor(dp,cm,"#e0e0e0",&db,&co_dummy)==False) {
-               fprintf(stderr,"can't alloc db color '%s'\n",
+               fprintf(stderr,"X11: can't alloc db color '%s'\n",
                        "#0000ff");
                return -1;
        }