[lcd4linux @ 2002-08-17 14:14:21 by reinelt]

USBLCD fixes

git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@156 3ae390bd-cb1e-0410-b409-cd5a39f66f1f

diff --git a/HD44780.c b/HD44780.c
index b9f0f5fdef4f4cc9b56a78ae88c73f946c9ab124..11cae9b844c2234c49756a250649ebcf2cb4d817 100644 (file)
--- a/HD44780.c
+++ b/HD44780.c
@@ -1,4 +1,4 @@
-/* $Id: HD44780.c,v 1.21 2002/04/30 07:20:15 reinelt Exp $
+/* $Id: HD44780.c,v 1.22 2002/08/17 14:14:21 reinelt Exp $
  *
  * driver for display modules based on the HD44780 chip
  *
@@ -20,6 +20,10 @@
  *
  *
  * $Log: HD44780.c,v $
+ * Revision 1.22  2002/08/17 14:14:21  reinelt
+ *
+ * USBLCD fixes
+ *
  * Revision 1.21  2002/04/30 07:20:15  reinelt
  *
  * implemented the new ndelay(nanoseconds) in all parallel port drivers
@@ -349,7 +353,7 @@ static int HD_open (void)
     debug ("using ppdev %s", PPdev);
     PPfd=open(PPdev, O_RDWR);
     if (PPfd==-1) {
-      error ("open(%s) failed: %s", PPdev, strerror(errno));
+      error ("HD44780: open(%s) failed: %s", PPdev, strerror(errno));
       return -1;
     }
 
@@ -362,7 +366,7 @@ static int HD_open (void)
 #endif
 
     if (ioctl(PPfd, PPCLAIM)) {
-      error ("ioctl(%s, PPCLAIM) failed: %d %s", PPdev, errno, strerror(errno));
+      error ("HD44780: ioctl(%s, PPCLAIM) failed: %d %s", PPdev, errno, strerror(errno));
       return -1;
     }
   } else
@@ -790,10 +794,10 @@ int HD_quit (void)
   if (PPdev) {
     debug ("closing ppdev %s", PPdev);
     if (ioctl(PPfd, PPRELEASE)) {
-      error ("ioctl(%s, PPRELEASE) failed: %s", PPdev, strerror(errno));
+      error ("HD44780: ioctl(%s, PPRELEASE) failed: %s", PPdev, strerror(errno));
     }
     if (close(PPfd)==-1) {
-      error ("close(%s) failed: %s", PPdev, strerror(errno));
+      error ("HD44780: close(%s) failed: %s", PPdev, strerror(errno));
       return -1;
     }
   } else 

diff --git a/USBLCD.c b/USBLCD.c
index d559741ca9020601d2c0d95a242119817211fdf3..696316bd720abd8ea7f18222ea97ce7d32a9b597 100644 (file)
--- a/USBLCD.c
+++ b/USBLCD.c
@@ -1,4 +1,4 @@
-/* $Id: USBLCD.c,v 1.1 2002/08/17 13:10:22 reinelt Exp $
+/* $Id: USBLCD.c,v 1.2 2002/08/17 14:14:21 reinelt Exp $
  *
  * Driver for USBLCD ( see http://www.usblcd.de )
  * This Driver is based on HD44780.c
@@ -21,6 +21,11 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  *
+ * $Log: USBLCD.c,v $
+ * Revision 1.2  2002/08/17 14:14:21  reinelt
+ *
+ * USBLCD fixes
+ *
  * Revision 1.0  2002/07/08 12:16:10  radams
  *
  * first version of the USBLCD driver
@@ -49,6 +54,8 @@
 #include <sys/ioctl.h>
 #include <sys/stat.h>
 
+#include <sys/time.h>
+
 #include "debug.h"
 #include "cfg.h"
 #include "display.h"
@@ -92,27 +99,42 @@ static SEGMENT Segment[128] = {{ len1:0,   len2:0,   type:255, used:0, ascii:32
                               { len1:255, len2:255, type:255, used:0, ascii:255 }};
 
 
-static void USBLCD_command (unsigned char cmd, int delay)
+static void USBLCD_command (unsigned char cmd)
 {
+  char a=0; 
+  
+  struct timeval now, end;
+  gettimeofday (&now, NULL);
 
-    {
-      char a=0; 
-      write(usblcd_file,&a,1);
-      write(usblcd_file,&cmd,1);
-    }
+  write(usblcd_file,&a,1);
+  write(usblcd_file,&cmd,1);
+
+  gettimeofday (&end, NULL);
+
+  debug ("command %x: %d usec", cmd, 1000000*(end.tv_sec-now.tv_sec)+end.tv_usec-now.tv_usec);
 }
 
-static void USBLCD_write (char *string, int len, int delay)
+static void USBLCD_write (char *string, int len)
 {
-    {
-      char a;
-      while (len--) {
-        a=*string++;
-    
-        if(a==0) write(usblcd_file,&a,1);
-        write(usblcd_file,&a,1);
-      }
-    }
+  int len0=len;
+  int dur;
+  struct timeval now, end;
+  gettimeofday (&now, NULL);
+  
+#if 0
+  while (len--) {
+    char a=*string++;
+    if(a==0) write(usblcd_file,&a,1);
+    write(usblcd_file,&a,1);
+  }
+#else
+  write(usblcd_file,string,len);
+
+#endif
+  gettimeofday (&end, NULL);
+  dur=1000000*(end.tv_sec-now.tv_sec)+end.tv_usec-now.tv_usec;
+  debug ("write (%d): %d usec (%d usec/byte)", len0, dur, dur/len0);
+
 }
 
 
@@ -127,48 +149,48 @@ static int USBLCD_open (void)
     return -1;
   }
 
-  memset(buf,0,128);
+  memset(buf,0,sizeof(buf));
 
   if( ioctl(usblcd_file,GET_DRV_VERSION, buf)!=0) {
-      error ("IOCTL failed, could not get Driver Version!\n");
-      return -2;
+    error ("USBLCD: ioctl() failed, could not get Driver Version!");
+    return -2;
   } ;
 
-  debug("Driver Version: %s\n",buf);
+  debug("Driver Version: %s",buf);
 
   if( sscanf(buf,"USBLCD Driver Version %d.%d",&major,&minor)!=2) {
-    error("Could not read Driver Version!\n");
+    error("USBLCD: could not read Driver Version!");
     return -4;
   };
  
   if(major!=1) {
-    error("Driver Version not supported!\n");
+    error("USBLCD: Driver Version not supported!");
     return -4;
   }
 
-  memset(buf,0,128);
+  memset(buf,0,sizeof(buf));
 
   if( ioctl(usblcd_file,GET_HARD_VERSION, buf)!=0) {
-      error ("IOCTL failed, could not get Hardware Version!\n");
-      return -3;
+    error ("USBLCD: ioctl() failed, could not get Hardware Version!");
+    return -3;
   } ;
 
-  debug("Hardware Version: %s\n\n",buf);
+  debug("Hardware Version: %s",buf);
 
   if( sscanf(buf,"%d.%d",&major,&minor)!=2) {
-    error("Could not read Hardware Version!\n");
+    error("USBLCD: could not read Hardware Version!");
     return -4;
   };
 
   if(major!=1) {
-    error("Hardware Version not supported!\n");
+    error("USBLCD: Hardware Version not supported!");
     return -4;
   }
 
-  USBLCD_command (0x29, 40);   // 8 Bit mode, 1/16 duty cycle, 5x8 font
-  USBLCD_command (0x08, 40);   // Display off, cursor off, blink off
-  USBLCD_command (0x0c, 1640); // Display on, cursor off, blink off, wait 1.64 ms
-  USBLCD_command (0x06, 40);   // curser moves to right, no shift
+  USBLCD_command (0x29); // 8 Bit mode, 1/16 duty cycle, 5x8 font
+  USBLCD_command (0x08); // Display off, cursor off, blink off
+  USBLCD_command (0x0c); // Display on, cursor off, blink off
+  USBLCD_command (0x06); // curser moves to right, no shift
 
   return 0;
 }
@@ -335,8 +357,8 @@ static void USBLCD_define_chars (void)
       }
       break;
     }
-    USBLCD_command (0x40|8*c, 40);
-    USBLCD_write (buffer, 8, 120); // 120 usec delay for CG RAM write
+    USBLCD_command (0x40|8*c);
+    USBLCD_write (buffer, 8);
   }
 }
 
@@ -353,7 +375,7 @@ int USBLCD_clear (void)
       Bar[row][col].segment=-1;
     }
   }
-  USBLCD_command (0x01, 1640); // clear display
+  USBLCD_command (0x01); // clear display
   return 0;
 }
 
@@ -370,13 +392,14 @@ int USBLCD_init (LCD *Self)
     error ("USBLCD: no 'Port' entry in %s", cfg_file());
     return -1;
   }
-  if (port[0]=='/') Port=strdup(port);
-  else {
+  if (port[0]=='/') {
+    Port=strdup(port);
+  } else {
     Port=(char *)malloc(5/*/dev/ */+strlen(port)+1);
     sprintf(Port,"/dev/%s",port);
   }
 
-  debug ("USBLCD using device %s ", Port);
+  debug ("using device %s ", Port);
 
   s=cfg_get("Size");
   if (s==NULL || *s=='\0') {
@@ -402,10 +425,8 @@ int USBLCD_init (LCD *Self)
 
 void USBLCD_goto (int row, int col)
 {
-  int pos;
-
-  pos=(row%2)*64+(row/2)*20+col;
-  USBLCD_command (0x80|pos, 40);
+  int pos=(row%2)*64+(row/2)*20+col;
+  USBLCD_command (0x80|pos);
 }
 
 int USBLCD_put (int row, int col, char *text)
@@ -519,7 +540,7 @@ int USBLCD_flush (void)
        if (Txt[row][col]=='\t') break;
        *p=Txt[row][col];
       }
-      USBLCD_write (buffer, p-buffer, 40); // 40 usec delay for write
+      USBLCD_write (buffer, p-buffer);
     }
   }
 
@@ -529,10 +550,8 @@ int USBLCD_flush (void)
 
 int USBLCD_quit (void)
 {
-    debug ("closing port %s", Port);
-    close(usblcd_file);
-    exit(0);
-
+  debug ("closing port %s", Port);
+  close(usblcd_file);
   return 0;
 }
 

diff --git a/udelay.c b/udelay.c
index d1ce790966b8f6fcc67831ac8abcefccf4105c73..2180f66993409e386d778bafdaa893168e5a4661 100644 (file)
--- a/udelay.c
+++ b/udelay.c
@@ -1,4 +1,4 @@
-/* $Id: udelay.c,v 1.7 2002/04/29 11:00:28 reinelt Exp $
+/* $Id: udelay.c,v 1.8 2002/08/17 14:14:21 reinelt Exp $
  *
  * short delays
  *
@@ -20,6 +20,10 @@
  *
  *
  * $Log: udelay.c,v $
+ * Revision 1.8  2002/08/17 14:14:21  reinelt
+ *
+ * USBLCD fixes
+ *
  * Revision 1.7  2002/04/29 11:00:28  reinelt
  *
  * added Toshiba T6963 driver
@@ -229,6 +233,9 @@ void udelay_init (void)
 
 void ndelay (unsigned long nsec)
 {
+
+#ifdef HAVE_ASM_MSR_H
+
   if (ticks_per_usec) {
 
     unsigned int t1, t2;
@@ -241,22 +248,26 @@ void ndelay (unsigned long nsec)
       rdtscl(t2);
     } while ((t2-t1)<nsec);
     
-  } else {
+  } else
+
+#endif
+
+    {
 
-    struct timeval now, end;
+      struct timeval now, end;
     
-    gettimeofday (&end, NULL);
-    end.tv_usec+=(nsec+999)/1000;
-    while (end.tv_usec>1000000) {
-      end.tv_usec-=1000000;
-      end.tv_sec++;
-    }
+      gettimeofday (&end, NULL);
+      end.tv_usec+=(nsec+999)/1000;
+      while (end.tv_usec>1000000) {
+       end.tv_usec-=1000000;
+       end.tv_sec++;
+      }
     
-    do {
-      rep_nop();
-      gettimeofday(&now, NULL);
-    } while (now.tv_sec==end.tv_sec?now.tv_usec<end.tv_usec:now.tv_sec<end.tv_sec);
-  }
+      do {
+       rep_nop();
+       gettimeofday(&now, NULL);
+      } while (now.tv_sec==end.tv_sec?now.tv_usec<end.tv_usec:now.tv_sec<end.tv_sec);
+    }
 }
 
 #endif