[lcd4linux @ 2003-08-15 07:54:07 by reinelt]

HD44780 4 bit mode implemented

git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@216 3ae390bd-cb1e-0410-b409-cd5a39f66f1f

diff --git a/HD44780.c b/HD44780.c
index 3aedffbba5bbf3428bb9240dc513f9917f63b3f1..ce54b24cac6885a4ca647f91bbdf5648ebc5f6a7 100644 (file)
--- a/HD44780.c
+++ b/HD44780.c
@@ -1,4 +1,4 @@
-/* $Id: HD44780.c,v 1.30 2003/08/12 05:10:31 reinelt Exp $
+/* $Id: HD44780.c,v 1.31 2003/08/15 07:54:07 reinelt Exp $
  *
  * driver for display modules based on the HD44780 chip
  *
@@ -24,6 +24,9 @@
  *
  *
  * $Log: HD44780.c,v $
+ * Revision 1.31  2003/08/15 07:54:07  reinelt
+ * HD44780 4 bit mode implemented
+ *
  * Revision 1.30  2003/08/12 05:10:31  reinelt
  * first version of HD44780 4Bit-Mode patch
  *
@@ -188,12 +191,12 @@
 #define T_PW    400 // Enable pulse width
 #define T_AS     20 // Address setup time
 #define T_H      40 // Data hold time
-// Fixme: hejl: genau verdreht??
 
 
 static LCD Lcd;
 
 static char Txt[4][40];
+static int  Bits=0;
 static int  GPO=0;
 
 static unsigned char SIGNAL_RW;
@@ -240,18 +243,26 @@ static void HD_byte (unsigned char data, unsigned char RS)
 static void HD_command (unsigned char cmd, int delay)
 {
     
-  // put data on DB1..DB8
-  parport_data (cmd);
+  if (Bits==8) {
+    
+    // put data on DB1..DB8
+    parport_data (cmd);
   
-  // clear RW and RS
-  parport_control (SIGNAL_RW | SIGNAL_RS, 0);
+    // clear RW and RS
+    parport_control (SIGNAL_RW | SIGNAL_RS, 0);
     
-  // Address set-up time
-  ndelay(T_AS);
+    // Address set-up time
+    ndelay(T_AS);
 
-  // send command
-  parport_toggle (SIGNAL_ENABLE, 1, T_PW);
-    
+    // send command
+    parport_toggle (SIGNAL_ENABLE, 1, T_PW);
+
+  } else {
+
+    HD_byte (cmd, 0);
+
+  }
+  
   // wait for command completion
   udelay(delay);
 
@@ -260,24 +271,40 @@ static void HD_command (unsigned char cmd, int delay)
 
 static void HD_write (char *string, int len, int delay)
 {
-  // clear RW, set RS
-  parport_control (SIGNAL_RW | SIGNAL_RS, SIGNAL_RS);
 
-  // Address set-up time
-  ndelay(40);
-  
-  while (len--) {
-    
-    // put data on DB1..DB8
-    parport_data (*(string++));
-    
-    // send command
-    // Enable cycle time = 230ns
-    parport_toggle (SIGNAL_ENABLE, 1, 230);
+  if (Bits==8) {
+
+    // clear RW, set RS
+    parport_control (SIGNAL_RW | SIGNAL_RS, SIGNAL_RS);
+
+    // Address set-up time
+    ndelay(T_AS);
     
-    // wait for command completion
-    udelay(delay);
+    while (len--) {
+      
+      // put data on DB1..DB8
+      parport_data (*(string++));
+      
+      // send command
+      parport_toggle (SIGNAL_ENABLE, 1, T_PW);
+      
+      // wait for command completion
+      udelay(delay);
+    }
+
+  } else { // 4 bit mode
+
+    while (len--) {
+
+      // send data with RS enabled
+      HD_byte (*(string++), SIGNAL_RS);
+
+      // wait for command completion
+      udelay(delay);
+    }
+
   }
+
 }
 
 static void HD_setGPO (int bits)
@@ -356,27 +383,54 @@ int HD_init (LCD *Self)
   Self->gpos=gpos;
   Lcd=*Self;
   
-  if ((SIGNAL_RW=parport_wire ("RW", "GND"))==0xff) return -1;
-  if ((SIGNAL_RS=parport_wire ("RS", "AUTOFD"))==0xff) return -1;
-  if ((SIGNAL_ENABLE=parport_wire ("ENABLE", "STROBE"))==0xff) return -1;
-  if ((SIGNAL_GPO=parport_wire ("GPO", "INIT"))==0xff) return -1;
+  s=cfg_get("Bits", "8");
+  if ((Bits=strtol(s, &e, 0))==0 || *e!='\0' || (Bits!=4 && Bits!=8)) {
+    error ("HD44780: bad Bits '%s' in %s, should be '4' or '8'", s, cfg_file());
+    return -1;
+  }    
+  info ("wiring: using %d bit mode", Bits);
 
+  if (Bits==8) {
+    if ((SIGNAL_RS     = parport_wire_ctrl ("RS",     "AUTOFD"))==0xff) return -1;
+    if ((SIGNAL_RW     = parport_wire_ctrl ("RW",     "GND")   )==0xff) return -1;
+    if ((SIGNAL_ENABLE = parport_wire_ctrl ("ENABLE", "STROBE"))==0xff) return -1;
+    if ((SIGNAL_GPO    = parport_wire_ctrl ("GPO",    "INIT")  )==0xff) return -1;
+  } else {
+    if ((SIGNAL_RS     = parport_wire_data ("RS",     "DB4"))==0xff) return -1;
+    if ((SIGNAL_RW     = parport_wire_data ("RW",     "DB5"))==0xff) return -1;
+    if ((SIGNAL_ENABLE = parport_wire_data ("ENABLE", "DB6"))==0xff) return -1;
+    if ((SIGNAL_GPO    = parport_wire_data ("GPO",    "DB7"))==0xff) return -1;
+  }
+  
   if (parport_open() != 0) {
     error ("HD44780: could not initialize parallel port!");
     return -1;
   }
 
   // clear RW
-  parport_control (SIGNAL_RW, 0);
+  if (Bits==8) {
+    parport_control (SIGNAL_RW, 0);
+  } else {
+    parport_data (0);
+  }
 
   // set direction: write
   parport_direction (0);
 
   // initialize display
-  HD_command (0x30, 4100); // 8 Bit mode, wait 4.1 ms
-  HD_command (0x30, 100);  // 8 Bit mode, wait 100 us
-  HD_command (0x30, 4100); // 8 Bit mode, wait 4.1 ms
-  HD_command (0x38, 40);   // 8 Bit mode, 1/16 duty cycle, 5x8 font
+  if (Bits==8) {
+    HD_command (0x30, 4100); // 8 Bit mode, wait 4.1 ms
+    HD_command (0x30, 100);  // 8 Bit mode, wait 100 us
+    HD_command (0x30, 4100); // 8 Bit mode, wait 4.1 ms
+    HD_command (0x38, 40);   // 8 Bit mode, 1/16 duty cycle, 5x8 font
+  } else {
+    HD_nibble(0x03); udelay(4100); // 4 Bit mode, wait 4.1 ms
+    HD_nibble(0x03); udelay(100);  // 4 Bit mode, wait 100 us
+    HD_nibble(0x03); udelay(4100); // 4 Bit mode, wait 4.1 ms
+    HD_nibble(0x02); udelay(100);  // 4 Bit mode, wait 100 us
+    HD_command (0x28, 40);        // 4 Bit mode, 1/16 duty cycle, 5x8 font
+  }
+  
   HD_command (0x08, 40);   // Display off, cursor off, blink off
   HD_command (0x0c, 1640); // Display on, cursor off, blink off, wait 1.64 ms
   HD_command (0x06, 40);   // curser moves to right, no shift

diff --git a/M50530.c b/M50530.c
index e079463a364eb16bc8719fd8df46e1e976c80dcb..402e59794c1e62c58528a168c63586181d689774 100644 (file)
--- a/M50530.c
+++ b/M50530.c
@@ -1,4 +1,4 @@
-/* $Id: M50530.c,v 1.9 2003/07/24 04:48:09 reinelt Exp $
+/* $Id: M50530.c,v 1.10 2003/08/15 07:54:07 reinelt Exp $
  *
  * driver for display modules based on the M50530 chip
  *
@@ -20,6 +20,9 @@
  *
  *
  * $Log: M50530.c,v $
+ * Revision 1.10  2003/08/15 07:54:07  reinelt
+ * HD44780 4 bit mode implemented
+ *
  * Revision 1.9  2003/07/24 04:48:09  reinelt
  * 'soft clear' needed for virtual rows
  *
@@ -202,10 +205,10 @@ int M5_init (LCD *Self)
   Self->gpos=gpos;
   Lcd=*Self;
   
-  if ((SIGNAL_EX=parport_wire ("EX",   "STROBE"))==0xff) return -1;
-  if ((SIGNAL_IOC1=parport_wire ("IOC1", "SELECT"))==0xff) return -1;
-  if ((SIGNAL_IOC2=parport_wire ("IOC2", "AUTOFD"))==0xff) return -1;
-  if ((SIGNAL_GPO=parport_wire ("GPO", "INIT"))==0xff) return -1;
+  if ((SIGNAL_EX   = parport_wire_ctrl ("EX",   "STROBE"))==0xff) return -1;
+  if ((SIGNAL_IOC1 = parport_wire_ctrl ("IOC1", "SELECT"))==0xff) return -1;
+  if ((SIGNAL_IOC2 = parport_wire_ctrl ("IOC2", "AUTOFD"))==0xff) return -1;
+  if ((SIGNAL_GPO  = parport_wire_ctrl ("GPO",  "INIT")  )==0xff) return -1;
   
   if (parport_open() != 0) {
     error ("M50530: could not initialize parallel port!");

diff --git a/T6963.c b/T6963.c
index 47bcf8b85af227ea4df739efc17e7d18f5e48e24..20221bf2b46fc9ab5b0c0c76a7e95b6a13cdf706 100644 (file)
--- a/T6963.c
+++ b/T6963.c
@@ -1,4 +1,4 @@
-/* $Id: T6963.c,v 1.8 2003/08/01 05:15:42 reinelt Exp $
+/* $Id: T6963.c,v 1.9 2003/08/15 07:54:07 reinelt Exp $
  *
  * driver for display modules based on the Toshiba T6963 chip
  *
@@ -20,6 +20,9 @@
  *
  *
  * $Log: T6963.c,v $
+ * Revision 1.9  2003/08/15 07:54:07  reinelt
+ * HD44780 4 bit mode implemented
+ *
  * Revision 1.8  2003/08/01 05:15:42  reinelt
  * last cleanups for 0.9.9
  *
@@ -342,10 +345,10 @@ int T6_init (LCD *Self)
     return -1;
   }
 
-  if ((SIGNAL_CE=parport_wire ("CE", "STROBE"))==0xff) return -1;
-  if ((SIGNAL_CD=parport_wire ("CD", "SELECT"))==0xff) return -1;
-  if ((SIGNAL_RD=parport_wire ("RD", "AUTOFD"))==0xff) return -1;
-  if ((SIGNAL_WR=parport_wire ("WR", "INIT"))==0xff) return -1;
+  if ((SIGNAL_CE=parport_wire_ctrl ("CE", "STROBE"))==0xff) return -1;
+  if ((SIGNAL_CD=parport_wire_ctrl ("CD", "SELECT"))==0xff) return -1;
+  if ((SIGNAL_RD=parport_wire_ctrl ("RD", "AUTOFD"))==0xff) return -1;
+  if ((SIGNAL_WR=parport_wire_ctrl ("WR", "INIT")  )==0xff) return -1;
 
   if (parport_open() != 0) {
     error ("HD44780: could not initialize parallel port!");

diff --git a/parport.c b/parport.c
index 2b2246996ddebad3b94c855d65d556ae2af59f3b..a1714ede05c05da72836b20b58eb65cdbc98580e 100644 (file)
--- a/parport.c
+++ b/parport.c
@@ -1,4 +1,4 @@
-/* $Id: parport.c,v 1.2 2003/04/07 06:03:05 reinelt Exp $
+/* $Id: parport.c,v 1.3 2003/08/15 07:54:07 reinelt Exp $
  *
  * generic parallel port handling
  *
@@ -20,6 +20,9 @@
  *
  *
  * $Log: parport.c,v $
+ * Revision 1.3  2003/08/15 07:54:07  reinelt
+ * HD44780 4 bit mode implemented
+ *
  * Revision 1.2  2003/04/07 06:03:05  reinelt
  * further parallel port abstraction
  *
@@ -40,10 +43,14 @@
  *   closes parallel port
  *   returns 0 if ok, -1 on failure
  *
- * unsigned char parport_wire (char *name, char *deflt)
+ * unsigned char parport_wire_ctrl (char *name, char *deflt)
  *   reads wiring for one control signal from config
  *   returns PARPORT_CONTROL_* or 255 on error
  *
+ * unsigned char parport_wire_data (char *name, char *deflt)
+ *   reads wiring for one data signal from config
+ *   returns 1<<bitpos or 255 on error
+ *
  * void parport_direction (int direction)
  *   0 - write to parport
  *   1 - read from parport
@@ -233,7 +240,7 @@ int parport_close (void)
 }
 
 
-unsigned char parport_wire (char *name, unsigned char *deflt)
+unsigned char parport_wire_ctrl (char *name, unsigned char *deflt)
 {
   unsigned char w;
   char wire[256];
@@ -256,27 +263,58 @@ unsigned char parport_wire (char *name, unsigned char *deflt)
     error ("         should be STROBE, AUTOFD, INIT, SELECT or GND");
     return 0xff;
   }
-  
+
   if (w&PARPORT_CONTROL_STROBE) {
-    info ("wiring: [PARPORT:STROBE]==>[DISPLAY:%s]", name);
+    info ("wiring: [DISPLAY:%s]<==>[PARPORT:STROBE]", name);
   }
   if (w&PARPORT_CONTROL_AUTOFD) {
-    info ("wiring: [PARPORT:AUTOFD]==>[DISPLAY:%s]", name);
+    info ("wiring: [DISPLAY:%s]<==>[PARPORT:AUTOFD]", name);
   }
   if (w&PARPORT_CONTROL_INIT) {
-    info ("wiring: [PARPORT:INIT]==>[DISPLAY:%s]", name);
+    info ("wiring: [DISPLAY:%s]<==>[PARPORT:INIT]", name);
   }
   if (w&PARPORT_CONTROL_SELECT) {
-    info ("wiring: [PARPORT:SELECT]==>[DISPLAY:%s]", name);
+    info ("wiring: [DISPLAY:%s]<==>[PARPORT:SELECT]", name);
   }
   if (w==0) {
-    info ("wiring: [PARPORT:GND]==>[DISPLAY:%s]", name);
+    info ("wiring: [DISPLAY:%s]<==>[PARPORT:GND]", name);
   }
   
   return w;
 }
 
 
+unsigned char parport_wire_data (char *name, unsigned char *deflt)
+{
+  unsigned char w;
+  char wire[256];
+  int is_data=0;
+  char *s;
+  
+  snprintf (wire, sizeof(wire), "Wire.%s", name);
+  s=cfg_get (wire,deflt);
+  if(strlen(s)==3 && strncasecmp(s,"DB",2)==0 && s[2]>='0' && s[2]<='7') {
+    w=s[2]-'0';
+  } else if(strcasecmp(s,"GND")==0) {
+    w=0;
+  } else {
+    error ("parport: unknown signal <%s> for wire <%s>", s, name);
+    error ("         should be DB..7 or GND");
+    return 0xff;
+  }
+  
+  if (w==0) {
+    info ("wiring: [DISPLAY:%s]<==>[PARPORT:GND]", name);
+  } else {
+    info ("wiring: [DISPLAY:%s]<==>[PARPORT:DB%d]", name, w);
+  }
+  
+  w=1<<w;
+
+  return w;
+}
+
+
 void parport_direction (int direction)
 {
 #ifdef WITH_PPDEV

diff --git a/parport.h b/parport.h
index a7e5d41484c7dab1be847735820acb12c5ffd7c0..d4b0362af251a11d4aa2a5b2677450c03e8c61e3 100644 (file)
--- a/parport.h
+++ b/parport.h
@@ -1,4 +1,4 @@
-/* $Id: parport.h,v 1.2 2003/04/07 06:03:10 reinelt Exp $
+/* $Id: parport.h,v 1.3 2003/08/15 07:54:07 reinelt Exp $
  *
  * generic parallel port handling
  *
@@ -20,6 +20,9 @@
  *
  *
  * $Log: parport.h,v $
+ * Revision 1.3  2003/08/15 07:54:07  reinelt
+ * HD44780 4 bit mode implemented
+ *
  * Revision 1.2  2003/04/07 06:03:10  reinelt
  * further parallel port abstraction
  *
@@ -33,7 +36,8 @@
 
 int parport_open (void);
 int parport_close (void);
-unsigned char parport_wire (char *name, char *deflt);
+unsigned char parport_wire_ctrl (char *name, unsigned char *deflt);
+unsigned char parport_wire_data (char *name, unsigned char *deflt);
 void parport_direction (int direction);
 void parport_control (unsigned char mask, unsigned char value);
 void parport_toggle (unsigned char bit, int level, int delay);