--- /dev/null
+/* $Id: drv_RouterBoard.c,v 1.1 2004/08/29 13:03:41 reinelt Exp $
+ *
+ * driver for the "Router Board LCD port"
+ * see port details at http://www.routerboard.com
+ *
+ * Copyright (C) 2004 Roman Jozsef <rjoco77@freemail.hu>
+ *
+ * based on the HD44780 parallel port driver and RB SDK example
+ *
+ * This file is part of LCD4Linux.
+ *
+ * LCD4Linux is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * LCD4Linux is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+/* This particulary board not have paralell port but have a special LCD header
+ * where can connect an HD44780 display.
+ * This port called IOSC0 port, and is write only, this port control the
+ * 4 leds on board too.
+ * Because its a write only port you can't control leds outside lcd driver
+ * or inverse, for this added the socket controlled leds. To send led status
+ * simply open an UDP socket and send to localhost 127.0.0.1 port 3333 one
+ * byte or more anyway only the first byte 4 low bits used the others is
+ * cleared and ignored bit0 = Led1 ,bit1 = Led2 ...
+ * This socket polled via timer callback, for detail see at drv_RB_start()
+ * I add at to end of this file an example!
+ * If you don't want coment #define RB_WITH LEDS and this part will be ignored
+ *
+ * The connection details:
+ * The IOCS0 port lower 16 bits connected as follows:
+ * bit LCD LEDS
+ * 0..7 data
+ * 8 INITX
+ * 9 SLINX
+ * 10 AFDX
+ * 11 backlit
+ * 12 LED1
+ * 13 LED2
+ * 14 LED3
+ * 15 LED4
+ *
+ * LCD male header:
+ * 1 Vcc +5V
+ * 2 GND
+ * 3 RS (Register Select,AFDX)
+ * 4 Contrast adjust (controlled) but how? if you know tell me not mentioned on User Manual
+ * 5 E (enable signal, INITX)
+ * 6 R/W (Data read/write or SLINX) not used connect LCD pin to ground
+ * 7 Data 1
+ * 8 Data 0
+ * 9 Data 3
+ * 10 Data 2
+ * 11 Data 5
+ * 12 Data 4
+ * 13 Data 7
+ * 14 Data 6
+ * 15 Backlit GND (controlled) (IOSC0 bit 11)
+ * 16 Backlit Vcc +5V
+ *
+ * If you using this driver and board and you have any fun device connected,
+ * program or story :-) ,please share for me. Thanks.
+ *
+ * Literature
+ * [GEODE] Geode SC1100 Information Appliance On a Chip
+ * (http://www.national.com/ds/SC/SC1100.pdf)
+ * [RB User Manual]
+ * (http://www.routerboard.com)
+ */
+
+
+/*
+ *
+ * exported fuctions:
+ *
+ * struct DRIVER drv_RouterBoard
+ *
+ */
+
+
+
+
+
+#include "config.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <sys/io.h>
+
+#include "debug.h"
+#include "cfg.h"
+#include "udelay.h"
+#include "qprintf.h"
+#include "plugin.h"
+#include "widget.h"
+#include "widget_text.h"
+#include "widget_icon.h"
+#include "widget_bar.h"
+#include "drv.h"
+#include "drv_generic_text.h"
+
+
+/* #define RB_WITH_LEDS 1 */
+
+#ifdef RB_WITH_LEDS /* Build without socket&led support */
+
+#include <arpa/inet.h>
+#include <sys/socket.h>
+#include <sys/poll.h>
+
+#define POLL_TIMEOUT 10 /* Socket poll timeout */
+#define MAXMSG_SIZE 100 /* Max messagge we can receive */
+
+static int sock_c; /* Socket handler */
+static struct sockaddr_in *sacl;
+char sock_msg[MAXMSG_SIZE];
+
+#endif
+
+
+static char Name[]="RouterBoard";
+
+static int Model;
+static int Capabilities;
+
+/* RouterBoard control signals */
+
+#define LCD_INITX 0x0100
+#define LCD_SLINX 0x0200
+#define LCD_AFDX 0x0400
+#define LCD_BACKLIGHT 0x0800
+#define RB_LEDS 0xF000
+
+#define CAR 0x0CF8
+#define CDR 0x0CFC
+
+
+/* HD44780 execution timings [microseconds]
+ * as these values differ from spec to spec,
+ * we use the worst-case values.
+ */
+
+#define T_INIT1 4100 /* first init sequence: 4.1 msec */
+#define T_INIT2 100 /* second init sequence: 100 usec */
+#define T_EXEC 80 /* normal execution time */
+#define T_WRCG 120 /* CG RAM Write */
+#define T_CLEAR 1680 /* Clear Display */
+#define T_AS 60 /* Address setup time */
+
+/* Fixme: GPO's not yet implemented */
+static int GPOS;
+/* static int GPO=0; */
+
+/* Fixme: This actually ARE the GPO's... */
+static unsigned RB_Leds = 0;
+
+
+typedef struct {
+ int type;
+ char *name;
+ int capabilities;
+} MODEL;
+
+#define CAP_HD66712 (1<<0)
+
+static MODEL Models[] = {
+ { 0x01, "HD44780", 0 },
+ { 0x02, "HD66712", CAP_HD66712 },
+ { 0xff, "Unknown", 0 }
+};
+
+
+/****************************************/
+/*** hardware dependant functions ***/
+/****************************************/
+
+#ifdef RB_WITH_LEDS
+
+static int drv_RB_sock_init()
+{
+
+ if ((sacl = (struct sockaddr_in *) malloc(sizeof(struct sockaddr_in))) == NULL) {
+ return -1;
+ }
+
+ memset(sacl, 0, sizeof(struct sockaddr_in));
+ sacl->sin_family = AF_INET;
+ sacl->sin_port = htons(3333);//Listen Port
+ sacl->sin_addr.s_addr = inet_addr("127.0.0.1");//Listen Address
+
+ if ((sock_c = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
+ error ("Socket open failed");
+ free(sacl);
+ return -1;
+ }
+
+ if (bind(sock_c, (struct sockaddr *) sacl, sizeof(struct sockaddr_in)) < 0) {
+ error ("Socket bind open failed");
+ free(sacl);
+ return -1;
+ }
+ return 0;
+}
+
+
+static void drv_RB_poll_data ( void __attribute__((unused)) *notused)
+{
+ int len,size;
+ struct pollfd usfd;
+ usfd.fd = sock_c;
+ usfd.events = POLLIN | POLLPRI;
+ while (poll(&usfd, 1, POLL_TIMEOUT) > 0) {
+ len = sizeof(struct sockaddr_in);
+ if ((size = recvfrom(sock_c, sock_msg, MAXMSG_SIZE, 0, (struct sockaddr *) sacl,(socklen_t*) &len)) < 0);
+ else {
+ RB_Leds = sock_msg[0]&0x0F;
+ RB_Leds = RB_Leds << 12;
+ /* fprintf(stderr, "Received data %s\n",sock_msg); */
+ }
+ }
+}
+
+#endif
+
+
+/* IOCS0 port number can read from PCI Configuration Space Function 0 (F0) */
+/* at index 74h as 16 bit value (see [GEODE] 5.3.1 pg.151 and pg.176 Table 5-29 */
+
+
+static unsigned getIocs0Port (void)
+{
+ static unsigned ret = 0;
+
+ /*get IO permission, here you can't use ioperm command */
+ iopl(3);
+
+ if (!ret) {
+ outl(0x80009074, CAR);
+ ret = inw(CDR);
+ }
+ return ret;
+}
+
+
+
+static void drv_RB_command ( const unsigned char cmd, const int delay)
+{
+
+ outw( RB_Leds | LCD_INITX | LCD_BACKLIGHT | cmd, getIocs0Port());
+
+ ndelay(T_AS);
+
+ outw( RB_Leds | LCD_BACKLIGHT | cmd, getIocs0Port());
+
+ // wait for command completion
+ udelay(delay);
+
+}
+
+
+static void drv_RB_data ( const char *string, const int len, const int delay)
+{
+ int l = len;
+ unsigned char ch;
+
+ /* sanity check */
+ if (len<=0) return;
+
+ while (l--) {
+
+ ch = *(string++);
+
+ outw( RB_Leds | LCD_AFDX | LCD_INITX | LCD_BACKLIGHT | ch, getIocs0Port());
+
+ ndelay(T_AS);
+
+ outw( RB_Leds | LCD_AFDX | LCD_BACKLIGHT | ch, getIocs0Port());
+
+ // wait for command completion
+ udelay(delay);
+
+ }
+}
+
+
+static void drv_RB_clear (void)
+{
+ drv_RB_command ( 0x01, T_CLEAR);
+}
+
+
+static void drv_RB_goto (int row, int col)
+{
+ int pos;
+
+ /* 16x1 Displays are organized as 8x2 :-( */
+ if (DCOLS==16 && DROWS==1 && col>7) {
+ row++;
+ col-=8;
+ }
+
+ if (Capabilities & CAP_HD66712) {
+ /* the HD66712 doesn't have a braindamadged RAM layout */
+ pos = row*32 + col;
+ } else {
+ /* 16x4 Displays use a slightly different layout */
+ if (DCOLS==16 && DROWS==4) {
+ pos = (row%2)*64+(row/2)*16+col;
+ } else {
+ pos = (row%2)*64+(row/2)*20+col;
+ }
+ }
+ drv_RB_command ( (0x80|pos), T_EXEC);
+}
+
+
+static void drv_RB_write (const int row, const int col, const char *data, const int len)
+{
+ drv_RB_goto (row, col);
+ drv_RB_data ( data, len, T_EXEC);
+}
+
+
+static void drv_RB_defchar (const int ascii, const unsigned char *matrix)
+{
+ int i;
+ char buffer[8];
+
+ for (i = 0; i < 8; i++) {
+ buffer[i] = matrix[i] & 0x1f;
+ }
+
+ drv_RB_command ( 0x40|8*ascii, T_EXEC);
+ drv_RB_data ( buffer, 8, T_WRCG);
+}
+
+
+/* Fixme: GPO's */
+#if 0
+static void drv_RB_setGPO (const int bits)
+{}
+#endif
+
+static int drv_RB_start (const char *section, const int quiet)
+{
+ char *model, *strsize;
+ int rows=-1, cols=-1, gpos=-1;
+
+ model=cfg_get(section, "Model", "HD44780");
+ if (model!=NULL && *model!='\0') {
+ int i;
+ for (i=0; Models[i].type!=0xff; i++) {
+ if (strcasecmp(Models[i].name, model)==0) break;
+ }
+ if (Models[i].type==0xff) {
+ error ("%s: %s.Model '%s' is unknown from %s", Name, section, model, cfg_source());
+ return -1;
+ }
+ Model=i;
+ Capabilities=Models[Model].capabilities;
+ info ("%s: using model '%s'", Name, Models[Model].name);
+ } else {
+ error ("%s: empty '%s.Model' entry from %s", Name, section, cfg_source());
+ return -1;
+ }
+ free(model);
+
+ strsize = cfg_get(section, "Size", NULL);
+ if (strsize == NULL || *strsize == '\0') {
+ error ("%s: no '%s.Size' entry from %s", Name, section, cfg_source());
+ free(strsize);
+ return -1;
+ }
+ if (sscanf(strsize,"%dx%d",&cols,&rows)!=2 || rows<1 || cols<1) {
+ error ("%s: bad %s.Size '%s' from %s", Name, section, strsize, cfg_source());
+ free(strsize);
+ return -1;
+ }
+ free(strsize);
+
+ if (cfg_number(section, "GPOs", 0, 0, 8, &gpos)<0) return -1;
+ info ("%s: controlling %d GPO's", Name, gpos);
+
+#ifdef RB_WITH_LEDS
+
+ if( drv_RB_sock_init() < 0 )
+ {
+ error ("Sock error");
+ return -1;
+ } else timer_add (drv_RB_poll_data, NULL, 500, 0);
+
+#endif
+
+ DROWS = rows;
+ DCOLS = cols;
+ GPOS = gpos;
+
+ drv_RB_command (0x30, T_INIT1); /* 8 Bit mode, wait 4.1 ms */
+ drv_RB_command (0x30, T_INIT2); /* 8 Bit mode, wait 100 us */
+ drv_RB_command (0x38, T_EXEC); /* 8 Bit mode, 1/16 duty cycle, 5x8 font */
+
+ drv_RB_command (0x08, T_EXEC); /* Display off, cursor off, blink off */
+ drv_RB_command (0x0c, T_CLEAR); /* Display on, cursor off, blink off, wait 1.64 ms */
+ drv_RB_command (0x06, T_EXEC); /* curser moves to right, no shift */
+
+ if ((Capabilities & CAP_HD66712) && DROWS > 2) {
+ drv_RB_command ( 0x3c, T_EXEC); /* set extended register enable bit */
+ drv_RB_command ( 0x09, T_EXEC); /* set 4-line mode */
+ drv_RB_command ( 0x38, T_EXEC); /* clear extended register enable bit */
+ }
+
+ drv_RB_clear();
+ drv_RB_command (0x03, T_CLEAR); /* return home */
+
+ if (!quiet) {
+ char buffer[40];
+ qprintf(buffer, sizeof(buffer), "%s %dx%d", Name, DCOLS, DROWS);
+ if (drv_generic_text_greet (buffer, NULL)) {
+ sleep (3);
+ drv_RB_clear();
+ }
+ }
+
+ return 0;
+}
+
+
+/****************************************/
+/*** plugins ***/
+/****************************************/
+
+
+
+
+/****************************************/
+/*** widget callbacks ***/
+/****************************************/
+
+
+/* using drv_generic_text_draw(W) */
+/* using drv_generic_text_icon_draw(W) */
+/* using drv_generic_text_bar_draw(W) */
+
+
+/****************************************/
+/*** exported functions ***/
+/****************************************/
+
+
+/* list models */
+int drv_RB_list (void)
+{
+ int i;
+
+ for (i=0; Models[i].type!=0xff; i++) {
+ printf ("%s ", Models[i].name);
+ }
+ return 0;
+}
+
+/* initialize driver & display */
+int drv_RB_init (const char *section, const int quiet)
+{
+ WIDGET_CLASS wc;
+ int asc255bug;
+ int ret;
+
+ /* display preferences */
+ XRES = 5; /* pixel width of one char */
+ YRES = 8; /* pixel height of one char */
+ CHARS = 8; /* number of user-defineable characters */
+ CHAR0 = 0; /* ASCII of first user-defineable char */
+ GOTO_COST = 2; /* number of bytes a goto command requires */
+
+ /* real worker functions */
+ drv_generic_text_real_write = drv_RB_write;
+ drv_generic_text_real_defchar = drv_RB_defchar;
+
+
+ /* start display */
+ if ((ret=drv_RB_start (section, quiet))!=0)
+ return ret;
+
+ /* initialize generic text driver */
+ if ((ret=drv_generic_text_init(section, Name))!=0)
+ return ret;
+
+ /* initialize generic icon driver */
+ if ((ret=drv_generic_text_icon_init())!=0)
+ return ret;
+
+ /* initialize generic bar driver */
+ if ((ret=drv_generic_text_bar_init(0))!=0)
+ return ret;
+
+ /* add fixed chars to the bar driver */
+ /* most displays have a full block on ascii 255, but some have kind of */
+ /* an 'inverted P'. If you specify 'asc255bug 1 in the config, this */
+ /* char will not be used, but rendered by the bar driver */
+ cfg_number(section, "asc255bug", 0, 0, 1, &asc255bug);
+ drv_generic_text_bar_add_segment ( 0, 0,255, 32); /* ASCII 32 = blank */
+ if (!asc255bug)
+ drv_generic_text_bar_add_segment (255,255,255,255); /* ASCII 255 = block */
+
+ /* register text widget */
+ wc=Widget_Text;
+ wc.draw=drv_generic_text_draw;
+ widget_register(&wc);
+
+ /* register icon widget */
+ wc=Widget_Icon;
+ wc.draw=drv_generic_text_icon_draw;
+ widget_register(&wc);
+
+ /* register bar widget */
+ wc=Widget_Bar;
+ wc.draw=drv_generic_text_bar_draw;
+ widget_register(&wc);
+
+
+ return 0;
+}
+
+
+/* close driver & display */
+int drv_RB_quit (const int quiet) {
+
+ info("%s: shutting down.", Name);
+
+ drv_generic_text_quit();
+
+ /* clear *both* displays */
+ drv_RB_clear();
+
+ /* say goodbye... */
+ if (!quiet) {
+ drv_generic_text_greet ("goodbye!", NULL);
+ }
+
+#ifdef RB_WITH_LEDS
+
+ close(sock_c);
+ free(sacl); /*close network socket*/
+
+#endif
+
+ return (0);
+}
+
+
+DRIVER drv_RouterBoard = {
+ name: Name,
+ list: drv_RB_list,
+ init: drv_RB_init,
+ quit: drv_RB_quit,
+};
+
+
+
+/*
+
+Simple example to send led status to port 3333
+#include <stdio.h>
+#include <arpa/inet.h>
+#include <errno.h>
+
+int send_packet (unsigned char leds)
+{
+ struct sockaddr_in *sas;
+ int sock;
+ char msg[20];
+ msg[0]=leds;
+ msg[1]=0;
+
+ if ((sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP)) < 0) {
+ fprintf(stderr, "Socket option failed.\n");
+ return -1;
+ }
+
+ if (( sas = (struct sockaddr_in *) malloc(sizeof(struct sockaddr_in))) == NULL)
+ return -1 ;
+ memset( sas, 0, sizeof(struct sockaddr_in));
+ sas->sin_family = AF_INET;
+ sas->sin_port = htons(3333);
+ sas->sin_addr.s_addr = inet_addr("127.0.0.1");
+ if(sendto(sock,msg,6, 0, (struct sockaddr *) sas, sizeof(struct sockaddr_in)) > 0)
+ { free(sas);
+ return 1;
+ } //sent ok to dest
+
+ free(sas);
+ return -1; //Send failed
+}
+
+int main ()
+{
+ send_packet(0x03);
+ return 0;
+}
+
+*/
projects / lcd4linux.git / commitdiff